Difference between revisions of "Mythcommflag-wrapper"

mythcommflag-wrapper.sh

#!/bin/sh

# edit/tune these #
# DB username and password
# TODO AJB20110130 get these from $HOME/.mythtv/mysql.txt
MYTHUSER="mythtv"
MYTHPASS="mythtv"
# root of MythTV recordings
# TODO AJB20110130 generate this automatically from the storagegroups table
RECORDINGSROOT="/srv/myth"
# Allow ad breaks to be upto 400s long by coalescing non-silence
MAXCOMMBREAKSECS=400
# mytharchivehelper isn't frame-accurate, and mythcommflag won't add final cut pair if the end of the cut is greater
# than the actual final frame, so subtract $ENDFUDGEFRAMES from the value mytharchivehelper returns
ENDFUDGEFRAMES=75
# -70dB and minimum of 0.15s to be considered 'silent'
MP3SPLT_OPTS="th=-70,min=0.15"
# Log file
LOGFILE="/var/log/mythtv/mythcommflag-wrapper"

echo >>$LOGFILE "$0 run with [$*] at `date` by `whoami`"
#/usr/bin/mythcommflag run with [-j 584 -V 8213] at Sat Jan 29 17:26:58 GMT 2011 by root
#select recorded.basename from recorded join jobqueue where jobqueue.id=584 and jobqueue.chanid=recorded.chanid and jobqueue.starttime=recorded.starttime;

silence_detect() {
		local filename=$1
		
		TMPDIR=`mktemp -d /tmp/mythcommflag.XXXXXX` || exit 1		
		
		# get frame count, less 3 seconds (75 frames) fudge factor
		let FRAMES=`mytharchivehelper -i $filename $TMPDIR/streaminfo.xml 1 2>&1 | grep " frames = " | awk -F"= " '{print $2}'`-${ENDFUDGEFRAMES}

		# From <http://www.mythtv.org/wiki/Silence-detect.sh>

# AJB20110129 Have already checked for pre-existing cutlist, and this check doesn't work properly after --clearcutlist anyway
#		[[ "Cutlist: "  == `mythcommflag.orig --getcutlist -f $filename  |grep Cutlist` ]] \
#		    || { echo already has cutlist && exit 1; }

		cd $TMPDIR
		touch `basename $filename`.touch
		ionice -c3 nice ffmpeg -i $filename -acodec copy sound.mp3
		ionice -c3 nice mp3splt -s -p $MP3SPLT_OPTS sound.mp3

		#AJB20110129 add '$FRAMES' because mythcommflag now requires *pairs* of frames
		CUTLIST=`tail --lines=+3 mp3splt.log|sort -g |\
		       awk 'BEGIN{start=0;ORS=","}{if($2-start<'$MAXCOMMBREAKSECS')
		       {finish=$2} else {print int(start*25+1)"-"int(finish*25-25);
		       start=$1; finish=$2;}}END{print int(start*25+1)"-"'$FRAMES'}'`

		echo >>$LOGFILE "silence-detect has generated cutlist: $CUTLIST"

		rm -rf $TMPDIR
}		


if [ $# -eq 0 ]; then
	# run with no parameters, flag every unflagged recording
	exec mythcommflag.orig
	exit $?
else
	if [ $# -eq 4 -a "$1" = "-j" -a "$3" = "-V" ]; then
		# this is a manual flag job
		# TODO AJB20110129 generate a filelist from recorded table where commflagged=0 and cutlist=0
		# then run silence_detect over each filename
		JOB=$2
	else
		# we're being used in some other way, run the real mythcommmflag
		echo >>$LOGFILE "running mythcommflag.orig $*"
		exec mythcommflag.orig $*
		exit $?
	fi
	echo >>$LOGFILE "running job $JOB"
	HASCUTLIST=`mysql -u${MYTHUSER} -p${MYTHPASS} -e "use mythconverg; select recorded.cutlist from recorded join jobqueue where jobqueue.id=$JOB and jobqueue.chanid=recorded.chanid and jobqueue.starttime=recorded.starttime;" | tail -n +2`	
	if [ "$HASCUTLIST" = "1" ]; then
		echo "program already has (manual?) cutlist, exiting"
		exit 0
	fi
	CALLSIGN=`mysql -u${MYTHUSER} -p${MYTHPASS} -e "use mythconverg; select channel.callsign from channel join jobqueue where jobqueue.id=$JOB and jobqueue.chanid=channel.chanid;" | tail -n +2`
	CHANID=`mysql -u${MYTHUSER} -p${MYTHPASS} -e "use mythconverg; select chanid from jobqueue where jobqueue.id=$JOB;" | tail -n +2`	
	STARTTIME=`mysql -u${MYTHUSER} -p${MYTHPASS} -e "use mythconverg; select starttime from jobqueue where jobqueue.id=$JOB;" | tail -n +2`
	echo >>$LOGFILE "channel callsign is $CALLSIGN"
	echo >>$LOGFILE "chanid=$CHANID STARTTIME=$STARTTIME"
	BASENAME=`mysql -u${MYTHUSER} -p${MYTHPASS} -e "use mythconverg; select recorded.basename from recorded join jobqueue where jobqueue.id=$JOB and jobqueue.chanid=recorded.chanid and jobqueue.starttime=recorded.starttime;" | tail -n +2`	
	echo >>$LOGFILE "basename is $BASENAME"
	FILENAME=`ionice -c3 nice find ${RECORDINGSROOT} -name $BASENAME`
	echo >>$LOGFILE "filename is $FILENAME"	

#safe list
#	if [ "$CALLSIGN" = "Film4" -o "$CALLSIGN" = "ITV1" -o "$CALLSIGN" = "ITV1 +1" -o "$CALLSIGN" = "ITV2" -o "$CALLSIGN" = "ITV2 +1" -o "$CALLSIGN" = "ITV3" -o "$CALLSIGN" = "ITV4" -o "$CALLSIGN" = "Dave" -o "$CALLSIGN" = "Dave ja vu" ]; then
# Channel 4 channels seem to work too, but sometimes last cut is too long?
#	if [ "$CALLSIGN" = "Channel 4" -o "$CALLSIGN" = "Channel 4+1" -o "$CALLSIGN" = "More 4" -o "$CALLSIGN" = "E4" -o "$CALLSIGN" = "E4+1" -o "$CALLSIGN" = "Film4" -o "$CALLSIGN" = "ITV1" -o "$CALLSIGN" = "ITV1 +1" -o "$CALLSIGN" = "ITV2" -o "$CALLSIGN" = "ITV2 +1" -o "$CALLSIGN" = "ITV3" -o "$CALLSIGN" = "ITV4" -o "$CALLSIGN" = "Dave" -o "$CALLSIGN" = "Dave ja vu" ]; then
#	if [ "$CALLSIGN" = "FIVE USA" -o "$CALLSIGN" = "FIVER" -o "$CALLSIGN" = "FIVE" -o "$CALLSIGN" = "Channel 4" -o "$CALLSIGN" = "Channel 4+1" -o "$CALLSIGN" = "More 4" -o "$CALLSIGN" = "E4" -o "$CALLSIGN" = "E4+1" -o "$CALLSIGN" = "Film4" -o "$CALLSIGN" = "ITV1" -o "$CALLSIGN" = "ITV1 +1" -o "$CALLSIGN" = "ITV2" -o "$CALLSIGN" = "ITV2 +1" -o "$CALLSIGN" = "ITV3" -o "$CALLSIGN" = "ITV4" -o "$CALLSIGN" = "Dave" -o "$CALLSIGN" = "Dave ja vu" ]; then	
# Fails on FIVER and cuts almost entire recording. Works for other FIVE channels with caveat that they include news bulletins which are't cut
	if [ "$CALLSIGN" = "FIVE USA" -o "$CALLSIGN" = "FIVE" -o "$CALLSIGN" = "Channel 4" -o "$CALLSIGN" = "Channel 4+1" -o "$CALLSIGN" = "More 4" -o "$CALLSIGN" = "E4" -o "$CALLSIGN" = "E4+1" -o "$CALLSIGN" = "Film4" -o "$CALLSIGN" = "ITV1" -o "$CALLSIGN" = "ITV1 +1" -o "$CALLSIGN" = "ITV2" -o "$CALLSIGN" = "ITV2 +1" -o "$CALLSIGN" = "ITV3" -o "$CALLSIGN" = "ITV4" -o "$CALLSIGN" = "Dave" -o "$CALLSIGN" = "Dave ja vu" ]; then	
		echo >>$LOGFILE "Callsign in whitelist - will run silence_detect"		
		mysql -u${MYTHUSER} -p${MYTHPASS} -e "use mythconverg; update recorded set commflagged=2 where chanid=$CHANID and starttime='${STARTTIME}';"
		CUTLIST=""
		echo >>$LOGFILE "silence_detect $FILENAME"
		silence_detect $FILENAME
		echo >>$LOGFILE "silect_detect() set CUTLIST to $CUTLIST"
		mythcommflag --setcutlist $CUTLIST -f $FILENAME
		RC=$?
		# TODO AJB20110131 don't set cutlist as a cutlist, but insert it as type 4/5 marks into recordingseek
		echo "mythcommflag --setcutlist returned $RC"
		if [ $RC -eq 0 ]; then
			mysql -u${MYTHUSER} -p${MYTHPASS} -e "use mythconverg; update recorded set commflagged=1 where chanid=$CHANID and starttime='${STARTTIME}';"			
		else
			echo >>$LOGFILE "mythcommflag failed; returned $RC"
			mysql -u${MYTHUSER} -p${MYTHPASS} -e "use mythconverg; update recorded set commflagged=0 where chanid=$CHANID and starttime='${STARTTIME}';"					
		fi		
	else
		# Not a whitelisted channel for silence_detect
		echo >>$LOGFILE "won't run silence-detect, running mythcommflag.orig $*"
		exec mythcommflag.orig $*
		exit $?
	fi		
fi