|
|
| (29 intermediate revisions by 13 users not shown) |
| Line 1: |
Line 1: |
| | + | {{Cleanup|msg=This page should be cleared off in preparation for deletion. Tuner specific information should be migrated to the [http://linuxtv.org/wiki/index.php/Main_Page LinuxTV Wiki], and any additional information moved to more generic pages. Discuss the issue on the [[Talk:{{PAGENAME}}|talk page]]}} |
| | + | |
| | == Background == | | == Background == |
| | | | |
| | The following text represents my working notes, made when I updated my analogue (PVR-350 based) mythtv box to use a Ultraview DVB-T (which is basically a DViCO DVB-T re-badged). | | The following text represents my working notes, made when I updated my analogue (PVR-350 based) mythtv box to use a Ultraview DVB-T (which is basically a DViCO DVB-T re-badged). |
| | | | |
| − | These notes have also been edited by Richard Dale who uses two DViCO FusionHDTV DVB-T Plus cards on FC4 in Melbourne. | + | These notes have also been edited by Richard Dale who uses two DViCO FusionHDTV DVB-T Plus cards on FC4 in Melbourne, and Warwick Allison with slightly newer/different cards. |
| − | | |
| − | == Before you Start ==
| |
| − | | |
| − | This assumes that you've followed the [http://wilsonet.com/mythtv/ Fedora Myth(TV)ology HOWTO] guide on Fedora Core 3 or Fedora Core 4.
| |
| − | | |
| − | For other distributions, YMMV, but things should be reasonably close.
| |
| | | | |
| − | I have also included some notes for Ubuntu Breezy that should help.
| + | There are also notes for DViCO FusionHDTV DVB-T Dual Tuner cards. |
| | | | |
| − | == Card Source ==
| + | These notes do *not* apply to the DVICO "Lite" cards (Warwick never got those to actually work, but Dane Allison did). |
| | | | |
| − | I picked up my Ultraview card from AB&T in Philip, Canberra (Australia) - just under 200ish. Belconnen should have some also - apparently they're fairly easy to find around Canberra as of Nov 2005.
| |
| | | | |
| | + | The latest versions (as at 30 March 2007) of V4L now support the Ultraview Lite cards. |
| | == Hardware == | | == Hardware == |
| | | | |
| | When installing your card, ensure that you plug the ultraview/dvico audio-out port into the CD-in port (or AUX, if you have one), on your sound card. This is an on-card port in both cases - not one of the ones at the | | When installing your card, ensure that you plug the ultraview/dvico audio-out port into the CD-in port (or AUX, if you have one), on your sound card. This is an on-card port in both cases - not one of the ones at the |
| | rear that you can access from outside your computer. A suitable cable is supplied with the Ultraview. | | rear that you can access from outside your computer. A suitable cable is supplied with the Ultraview. |
| | + | |
| | + | The "DViCO FusionHDTV DVB-T Dual Tuner" card has two tuners. One is PCI, the other is USB. You will either need to connect an external USB cable to your card, or use the supplied internal USB cable which connects to your motherboard. |
| | | | |
| | == Kernel / Packages == | | == Kernel / Packages == |
| − |
| |
| − | Older kernels may not have the drivers required, so update to the most recent kernel available using:
| |
| − | yum update
| |
| | | | |
| | For the Ultraview card on FC3 with 2.6.12, Kudzu will automatically add an entry into /etc/modprobe.conf for you for the card, which should look like this: | | For the Ultraview card on FC3 with 2.6.12, Kudzu will automatically add an entry into /etc/modprobe.conf for you for the card, which should look like this: |
| Line 45: |
Line 40: |
| | options cx88xx card=21 | | options cx88xx card=21 |
| | | | |
| − | Breezy users will also want to use 'EasyUbuntu' to pull back the appropriate multimedia packages (win32codecs, etc). Once done, add the following to your /etc/apt/sources.list:
| + | === DViCO Dual Digital 2 === |
| | | | |
| − | deb http://deb.thehunter.ws/ breezy mythtv-stable
| + | Note: Much of this information below is historical. Ubuntu 10.4 (and possibly others) have the DViCO Dual Digital 2 working out-of-the-box, except for enabling propriety firmware for DVB cards via "enable hardware drivers". |
| − | #deb-src http://deb.thehunter.ws/ breezy mythtv-stable
| |
| | | | |
| − | .. and install the appropriate mythtv packages. | + | For those with a revision 1.4 or later board, Chris Pascoe has just released (August 2006) an update to make it work. |
| | | | |
| − | == Alsa ==
| + | I have confirmed it working on FC5 with a 2.6.17.8 vanilla kernel, and others have tested it to be working on other combinations. |
| | | | |
| − | Ensure that your 'CD' device on your sound card is enabled as a 'capture' device. Run: alsamixer, press F4 to switch to the 'Capture' options. Move to 'CD' and press 'space' to set CD as a capture device. Press F3 to jump back to 'Playback' and set the CD volume to 100%.
| + | It's part of the v4l-dvb sources. You will need to get the latest mercurial sources, and compile them. Most distros have mecurial available as extras (e.g. yum install mercurial). They recommend you use a vanilla kernel (i.e. one from www.kernel.org) and compile it yourself. In either cace, you'll need the kernel source. FC5 kernel soruce may be downloaded using yum install kernel-devel. |
| | | | |
| − | == Permissions ==
| + | The instructions are quite easy to follow. Find them at http://www.linuxtv.org and look for the "DVB CVS/Mercurial" on the sidebar. |
| | | | |
| − | For Fedora, add to /etc/security/console.perms:
| + | ==== Getting the Firmware manually ==== |
| | | | |
| − | # Mythtv permissions
| + | In addition to the v4l-dvb drivers, the USB tuner (it has both PCI and USB tuners) needs the correct firmare to operate. |
| − | <dvb>=/dev/dvb/adapter?/*
| |
| − | <console> 0660 /dev/lirc0 0660 root.uucp
| |
| − | <console> 0660 <dvb> 0660 root.root
| |
| | | | |
| − | Reboot. This will allow the mythtv user (or whoever logs into the console)
| + | If you do not have the firmware (FC5 does not ship with it, not sure if any others do), there is a script in the kernel documentation to get it: |
| − | to access the card, rather than restricting it to root only.
| + | cd /usr/src/linux-2.6.17.8/Documentation/dvb/ # Modify for source directory, if necessary |
| | + | chmod 777 get_dvb_firmware |
| | + | ./get_dvb_firmware bluebird |
| | | | |
| − | For Ubuntu Breezy, add the 'mythtv' user to the following groups in /etc/group:
| + | And you'll need to copy it to one of the following two places, depending on your distro: |
| − | cdrom, audio, video, plugdev | + | cp dvb-usb-bluebird-01.fw /usr/lib/hotplug/firmware/dvb-usb-bluebird-01.fw # OR |
| | + | cp dvb-usb-bluebird-01.fw /lib/firmware/dvb-usb-bluebird-01.fw # This one for FC5 |
| | | | |
| − | == Tuner == | + | == Alsa == |
| | | | |
| − | Go to http://www.dba.org.au/index.asp?sectionID=22, put in your post-code (eg: 2902)
| + | Ensure that your 'CD' device on your sound card is enabled as a 'capture' device. Run: alsamixer, press F4 to switch to the 'Capture' options. Move to 'CD' and press 'space' to set CD as a capture device. Press F3 to jump back to 'Playback' and set the CD volume to 100%. |
| − | Select the region that is closest to you (eg: Tuggeranong Hill)
| |
| − | Note down the "middle frequency" for each channel. Convert it to HZ by multiplying by 1000000 (788.5 becomes 788500000).
| |
| − | | |
| − | == tv_grab_au_reg ==
| |
| − | | |
| − | Download tv_grab_au_reg, and follow the instructions from http://www.cse.unsw.edu.au/~willu/xmltv/tv_grab_au_reg.html
| |
| − | | |
| − | Note the new grabber can obtain data from both Oztivo and ICE
| |
| − | | |
| − | Note: I fired up phpmyadmin at this point, and threw the xmlid into the channels table (I didn't follow the above instructions exactly) - I suspect you won't need to do this, so I won't go into significant detail.
| |
| − | | |
| − | == MythTV Setup ==
| |
| − | | |
| − | Run mythtvsetup
| |
| − | | |
| − | Set up the 'General' options as appropriate
| |
| − | | |
| − | Define a new Capture card, and configure it as a "Digital Video Broadcast Card (DVB)"
| |
| − | The DVB Card Number, is generally '0', but may be different on your system.
| |
| − | Once you have the correct Card type, and card number, the 'Card Name' and 'Type' should show appropriate values.
| |
| − | Under Advanced -> Recording Options: Check 'Use Hardware MPEG Encoder'
| |
| − | Finish
| |
| − | | |
| − | Video Sources -> New Video Source
| |
| − | Video Source Name: HDTV Tuner (this name can be pretty-much arbitrary)
| |
| − | XMLTV Listings Grabber: Australia
| |
| − | Channel frequency table: default
| |
| − | | |
| − | Input Connections: Set DVB0 to a video source of 'HDTV Tuner'
| |
| − | | |
| − | == Channel Editor ==
| |
| − | | |
| − | Go to 'Advanced' (Note: the 'm' key will allow you to edit/delete stuff in this submenu)
| |
| − | Select 'New Transport'
| |
| − | Enter each frequency you found above (in Hz). Select a Bandwidth of 7Hz
| |
| − | | |
| − | Select 'scan for channels'
| |
| − | Change 'scan type' to 'Existing transport scan'
| |
| − | Select each transport in turn, and Scan. Channels should be added to the main listing once they're found.
| |
| − | | |
| − | NOTE: This process didn't want to work for me under 0.19.
| |
| − | Channel frequencies for Tuggeranong are provided here:
| |
| − | | |
| − | INSERT INTO `channel` VALUES (1002, '2', '31', 1, 'ABC TV Canberra', 'ABC TV Canberra', '/home/mythtv/.mythtv/channels/abc.png', NULL, '', 'ABC-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 1, 529, 0);
| |
| − | INSERT INTO `channel` VALUES (1021, '21', '31', 1, 'ABC2', 'ABC2', '/home/mythtv/.mythtv/channels/abc.png', NULL, '', 'ABC2', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 1, 530, 0);
| |
| − | INSERT INTO `channel` VALUES (1022, '22', '31', 1, 'ABC TV', 'ABC TV', '/home/mythtv/.mythtv/channels/abc.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 1, 531, 0);
| |
| − | INSERT INTO `channel` VALUES (1020, '20', '31', 1, 'ABC HDTV', 'ABC HDTV', '/home/mythtv/.mythtv/channels/abc.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 1, 848, 0);
| |
| − | INSERT INTO `channel` VALUES (3374, '2374', NULL, 1, 'PRIME Canberra', 'PRIME Canberra', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', 'Prime-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 6, 2374, 0);
| |
| − | INSERT INTO `channel` VALUES (3400, '2400', NULL, 1, 'PRIME HD', 'PRIME HD', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 6, 2400, 0);
| |
| − | INSERT INTO `channel` VALUES (3401, '2401', NULL, 1, 'PRIME View 1', 'PRIME View 1', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 6, 2401, 0);
| |
| − | INSERT INTO `channel` VALUES (3402, '2402', NULL, 1, 'PRIME View 2', 'PRIME View 2', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 6, 2402, 0);
| |
| − | INSERT INTO `channel` VALUES (3403, '2403', NULL, 1, 'PRIME View 3', 'PRIME View 3', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 6, 2403, 0);
| |
| − | INSERT INTO `channel` VALUES (1030, '30', NULL, 1, 'SBS HD', 'SBS HD', '/home/mythtv/.mythtv/channels/sbs.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 3, 848, 0);
| |
| − | INSERT INTO `channel` VALUES (1003, '3', NULL, 1, 'SBS DIGITAL 1', 'SBS DIGITAL 1', '/home/mythtv/.mythtv/channels/sbs.png', NULL, '', 'SBS-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 3, 849, 0);
| |
| − | INSERT INTO `channel` VALUES (1033, '33', NULL, 1, 'SBS DIGITAL 2', 'SBS DIGITAL 2', '/home/mythtv/.mythtv/channels/sbs.png', NULL, '', 'SBS-NEWS', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 3, 850, 0);
| |
| − | INSERT INTO `channel` VALUES (1031, '31', NULL, 1, 'SBS EPG', 'SBS EPG', '/home/mythtv/.mythtv/channels/sbs.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 3, 851, 0);
| |
| − | INSERT INTO `channel` VALUES (1001, '1', NULL, 1, 'WIN TV Canberra', 'WIN TV Canberra', '/home/mythtv/.mythtv/channels/win.png', NULL, '', 'WIN-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 5, 1, 0);
| |
| − | INSERT INTO `channel` VALUES (1010, '10', NULL, 1, 'WIN TV HD', 'WIN TV HD', '/home/mythtv/.mythtv/channels/win.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 5, 10, 0);
| |
| − | INSERT INTO `channel` VALUES (3055, '2055', NULL, 1, 'SC10 Canberra', 'SC10 Canberra', '/home/mythtv/.mythtv/channels/10.png', NULL, '', 'Ten-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 4, 2055, 0);
| |
| − | INSERT INTO `channel` VALUES (3087, '2087', NULL, 1, 'SC10 HD', 'SC10 HD', '/home/mythtv/.mythtv/channels/10.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 4, 2087, 0);
| |
| − | | |
| − | | |
| − | INSERT INTO `dtv_multiplex` VALUES (1, 1, 529, 4112, 746500000, '1', NULL, NULL, NULL, 'qam_16', '7', '1/2', '8', '1/16', 0, 'qam_64', 'n', '3/4', 'dvb', 16, '20060218194836');
| |
| − | INSERT INTO `dtv_multiplex` VALUES (2, 1, NULL, NULL, 774500000, '0', NULL, NULL, NULL, 'qam_16', '7', 'Auto', '8', 'auto', 0, 'qam_64', 'n', 'Auto', 'dvb', 33, '20060218195323');
| |
| − | INSERT INTO `dtv_multiplex` VALUES (3, 1, NULL, NULL, 732500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 33, '20060218201128');
| |
| − | INSERT INTO `dtv_multiplex` VALUES (4, 1, NULL, NULL, 767500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 33, '20060218201158');
| |
| − | INSERT INTO `dtv_multiplex` VALUES (5, 1, 12922, 12915, 788500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 7, '20060220232313');
| |
| − | INSERT INTO `dtv_multiplex` VALUES (6, 1, 2462, 12929, 809500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 17, '20060218202301');
| |
| − | | |
| − | == LIRC ==
| |
| − | | |
| − | Grab lircd patch from http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/.
| |
| − | download lircd 07, patch, make as per instructions on the site. Copy the resulting lircd binary over /usr/sbin/lircd (beware: apt-get upgrades that include lircd may break your remote config. Might be worth saving off a copy of the binary somewhere else).
| |
| − | | |
| − | Fedora users: modify /etc/sysconfig/lircd to:
| |
| − | LIRCD_OPTIONS="--driver=dvico --device=/dev/hiddev0"
| |
| − | | |
| − | Ubuntu users: modify /etc/lirc/hardware.conf to include:
| |
| − | DEVICE="/dev/usb/hiddev0"
| |
| − | DRIVER="dvico"
| |
| − | | |
| − | (NOTE: There could potentially be other hiddev devices on your system.. in this case, your tuner may be hiddev1 or 2 - not sure how to best determine this).
| |
| − | | |
| − | ~mythtv/.mythtv/lirc: Set as follows:
| |
| − | | |
| − | Note: This config roughly mirrors the Hauppauge grey remote configuration,
| |
| − | with a few extras added to cope with the specific buttons on the DVICO
| |
| − | remote.
| |
| − | | |
| − | | |
| − | # Ultraview / dvico DVB-T Black remote
| |
| − |
| |
| − | # Channel Up
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = ch_up
| |
| − | repeat = 3
| |
| − | config = Up
| |
| − | end
| |
| − |
| |
| − | # Channel Down
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = ch_down
| |
| − | repeat = 3
| |
| − | config = Down
| |
| − | end
| |
| − |
| |
| − | # OK/Select
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = ok
| |
| − | config = Space
| |
| − | end
| |
| − |
| |
| − | # Play/Pause
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = playpause
| |
| − | config = P
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = stop
| |
| − | config = Esc
| |
| − | end
| |
| − |
| |
| − | # Escape/Exit/Back
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = back
| |
| − | config = Esc
| |
| − | end
| |
| − |
| |
| − | # Escape/Exit/Back
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = tv_onoff
| |
| − | config = Esc
| |
| − | end
| |
| − |
| |
| − | # big green start button
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = start
| |
| − | repeat = 3
| |
| − | config = Esc
| |
| − | end
| |
| − |
| |
| − | # Mute
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = mute
| |
| − | repeat = 3
| |
| − | config = F9
| |
| − | end
| |
| − |
| |
| − | # Fast forward (30 sec default)
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = fastforward
| |
| − | repeat = 24
| |
| − | config = Right
| |
| − | end
| |
| − |
| |
| − | # Back (10 sec default)
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = rewind
| |
| − | repeat = 24
| |
| − | config = Left
| |
| − | end
| |
| − |
| |
| − | # Skip forward (10 min default)
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = skip
| |
| − | repeat = 3
| |
| − | config = PgDown
| |
| − | end
| |
| − |
| |
| − | # Skip backward (10 min default)
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = replay
| |
| − | repeat = 3
| |
| − | config = PgUp
| |
| − | end
| |
| − |
| |
| − | # Record
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = record
| |
| − | repeat = 3
| |
| − | config = R
| |
| − | end
| |
| − |
| |
| − | # OSD browse
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = guide
| |
| − | repeat = 3
| |
| − | config = O
| |
| − | end
| |
| − |
| |
| − | # Display EPG while in live TV,
| |
| − | # View selected show while in EPG
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = setup
| |
| − | repeat = 3
| |
| − | config = M
| |
| − | end
| |
| − |
| |
| − | # Scroll up
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = up
| |
| − | repeat = 3
| |
| − | config = Up
| |
| − | end
| |
| − |
| |
| − | # Scroll down
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = down
| |
| − | repeat = 3
| |
| − | config = Down
| |
| − | end
| |
| − |
| |
| − | # Scroll Left
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = left
| |
| − | repeat = 3
| |
| − | config = Left
| |
| − | end
| |
| − |
| |
| − | # Scroll Right
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = right
| |
| − | repeat = 3
| |
| − | config = Right
| |
| − | end
| |
| − |
| |
| − | # Bring up OSD info
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = more
| |
| − | repeat = 3
| |
| − | config = I
| |
| − | end
| |
| − |
| |
| − | # Change display aspect ratio
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = aspect
| |
| − | repeat = 3
| |
| − | config = W
| |
| − | end
| |
| − |
| |
| − | # Seek to previous commercial cut point
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = snapshot
| |
| − | repeat = 3
| |
| − | config = Q
| |
| − | end
| |
| − |
| |
| − | # Seek to next commercial cut point
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = folder_open
| |
| − | repeat = 3
| |
| − | config = Z
| |
| − | end
| |
| − |
| |
| − | # Numbers 0-9
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 0
| |
| − | repeat = 3
| |
| − | config = 0
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 1
| |
| − | repeat = 3
| |
| − | config = 1
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 2
| |
| − | repeat = 3
| |
| − | config = 2
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 3
| |
| − | repeat = 3
| |
| − | config = 3
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 4
| |
| − | repeat = 3
| |
| − | config = 4
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 5
| |
| − | repeat = 3
| |
| − | config = 5
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 6
| |
| − | repeat = 3
| |
| − | config = 6
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 7
| |
| − | repeat = 3
| |
| − | config = 7
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 8
| |
| − | repeat = 3
| |
| − | config = 8
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = 9
| |
| − | repeat = 3
| |
| − | config = 9
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = dvd_menu
| |
| − | config = M
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = vol_down
| |
| − | repeat = 3
| |
| − | config = [
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = vol_up
| |
| − | repeat = 3
| |
| − | config = ]
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = mythtv
| |
| − | button = dtv
| |
| − | config = C
| |
| − | end
| |
| − | | |
| − | | |
| − | ~mythtv/lirc: Set as follows:
| |
| − | | |
| − | ### MPlayer/Xine lirc setup
| |
| − |
| |
| − | # Show OSD
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = guide
| |
| − | repeat = 3
| |
| − | config = osd
| |
| − | end
| |
| − |
| |
| − | # Pause playback
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = stop
| |
| − | repeat = 3
| |
| − | config = pause
| |
| − | end
| |
| − |
| |
| − | # Skip ahead a minute if playing
| |
| − | # If paused, resume playing
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = playpause
| |
| − | repeat = 3
| |
| − | config = seek +1
| |
| − | end
| |
| − |
| |
| − | # Stop playback and exit
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = tv_onoff
| |
| − | repeat = 3
| |
| − | config = quit
| |
| − | end
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = back
| |
| − | repeat = 3
| |
| − | config = quit
| |
| − | end
| |
| − |
| |
| − | # big green start button
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = start
| |
| − | repeat = 3
| |
| − | config = quit
| |
| − | end
| |
| − |
| |
| − | # Mute
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = mute
| |
| − | repeat = 3
| |
| − | config = mute
| |
| − | end
| |
| − |
| |
| − | # Seek back 10 seconds
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = left
| |
| − | repeat = 3
| |
| − | config = seek -10
| |
| − | end
| |
| − |
| |
| − | # Seek forward 30 seconds
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = right
| |
| − | repeat = 3
| |
| − | config = seek +30
| |
| − | end
| |
| − |
| |
| − | # Seek forward 3 minutes
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = fastforward
| |
| − | repeat = 3
| |
| − | config = seek +180
| |
| − | end
| |
| − |
| |
| − | # Seek backward 3 minutes
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = rewind
| |
| − | repeat = 3
| |
| − | config = seek -180
| |
| − | end
| |
| − |
| |
| − | # Seek forward 10 minutes
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = skip
| |
| − | repeat = 3
| |
| − | config = seek +600
| |
| − | end
| |
| − |
| |
| − | # Seek backward 10 minutes
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = replay
| |
| − | repeat = 3
| |
| − | config = seek -600
| |
| − | end
| |
| − |
| |
| − | # Toggle full-screen
| |
| − | begin
| |
| − | prog = mplayer
| |
| − | button = fullscreen
| |
| − | repeat = 3
| |
| − | config = vo_fullscreen
| |
| − | end
| |
| − |
| |
| − | # Xine
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = playpause
| |
| − | repeat = 3
| |
| − | config = Play
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = stop
| |
| − | repeat = 3
| |
| − | config = Pause
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = back
| |
| − | config = Quit
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = tv_onoff
| |
| − | config = Quit
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = right
| |
| − | repeat = 3
| |
| − | config = SeekRelative+10
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = left
| |
| − | repeat = 3
| |
| − | config = SeekRelative-10
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = fastforward
| |
| − | repeat = 3
| |
| − | config = SeekRelative+30
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = rewind
| |
| − | repeat = 3
| |
| − | config = SeekRelative-30
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = skip
| |
| − | repeat = 3
| |
| − | config = SeekRelative+300
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = replay
| |
| − | repeat = 3
| |
| − | config = SeekRelative-300
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = up
| |
| − | repeat = 1
| |
| − | config = EventUp
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = down
| |
| − | repeat = 1
| |
| − | config = EventDown
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = ok
| |
| − | repeat = 0
| |
| − | config = EventSelect
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = guide
| |
| − | repeat = 0
| |
| − | config = Menu
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = setup
| |
| − | repeat = 0
| |
| − | config = Menu
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = vol_up
| |
| − | repeat = 1
| |
| − | config = Volume+
| |
| − | end
| |
| − |
| |
| − | begin
| |
| − | prog = xine
| |
| − | button = vol_down
| |
| − | repeat = 1
| |
| − | config = Volume-
| |
| − | end
| |
| − | | |
| − | | |
| − | | |
| − | reboot.
| |
| − | | |
| − | | |
| − | [[Category:HOWTO]]
| |
The following text represents my working notes, made when I updated my analogue (PVR-350 based) mythtv box to use a Ultraview DVB-T (which is basically a DViCO DVB-T re-badged).
These notes have also been edited by Richard Dale who uses two DViCO FusionHDTV DVB-T Plus cards on FC4 in Melbourne, and Warwick Allison with slightly newer/different cards.
These notes do *not* apply to the DVICO "Lite" cards (Warwick never got those to actually work, but Dane Allison did).
When installing your card, ensure that you plug the ultraview/dvico audio-out port into the CD-in port (or AUX, if you have one), on your sound card. This is an on-card port in both cases - not one of the ones at the
rear that you can access from outside your computer. A suitable cable is supplied with the Ultraview.
The "DViCO FusionHDTV DVB-T Dual Tuner" card has two tuners. One is PCI, the other is USB. You will either need to connect an external USB cable to your card, or use the supplied internal USB cable which connects to your motherboard.
For the Ultraview card on FC3 with 2.6.12, Kudzu will automatically add an entry into /etc/modprobe.conf for you for the card, which should look like this:
On the Ultraview card on FC3 with 2.6.12 you will need to force the cx88xx module into DVICO mode by adding the following like
On FC4, kernel 2.6.15 and the DViCO FusionHDTV cards I didn't need to make any changes to modprobe.conf but did need to add the following lines to the start function of /etc/rc.d/init.d/mythbackend
For Ubuntu Breezy, modify the file /etc/modprobe.d/aliases, and change the line:
Note: Much of this information below is historical. Ubuntu 10.4 (and possibly others) have the DViCO Dual Digital 2 working out-of-the-box, except for enabling propriety firmware for DVB cards via "enable hardware drivers".
For those with a revision 1.4 or later board, Chris Pascoe has just released (August 2006) an update to make it work.
I have confirmed it working on FC5 with a 2.6.17.8 vanilla kernel, and others have tested it to be working on other combinations.
It's part of the v4l-dvb sources. You will need to get the latest mercurial sources, and compile them. Most distros have mecurial available as extras (e.g. yum install mercurial). They recommend you use a vanilla kernel (i.e. one from www.kernel.org) and compile it yourself. In either cace, you'll need the kernel source. FC5 kernel soruce may be downloaded using yum install kernel-devel.
In addition to the v4l-dvb drivers, the USB tuner (it has both PCI and USB tuners) needs the correct firmare to operate.
If you do not have the firmware (FC5 does not ship with it, not sure if any others do), there is a script in the kernel documentation to get it:
And you'll need to copy it to one of the following two places, depending on your distro:
Ensure that your 'CD' device on your sound card is enabled as a 'capture' device. Run: alsamixer, press F4 to switch to the 'Capture' options. Move to 'CD' and press 'space' to set CD as a capture device. Press F3 to jump back to 'Playback' and set the CD volume to 100%.
Cleanup: This page should be cleared off in preparation for deletion. Tuner specific information should be migrated to the LinuxTV Wiki, and any additional information moved to more generic pages. Discuss the issue on the talk page
