Difference between revisions of "DVICO-Ultraview Install in Australia"

Latest revision as of 19:39, 26 September 2021

Cleanup: This page should be cleared off in preparation for deletion. Tuner specific information should be migrated to the LinuxTV Wiki, and any additional information moved to more generic pages. Discuss the issue on the talk page

Background

The following text represents my working notes, made when I updated my analogue (PVR-350 based) mythtv box to use a Ultraview DVB-T (which is basically a DViCO DVB-T re-badged).

These notes have also been edited by Richard Dale who uses two DViCO FusionHDTV DVB-T Plus cards on FC4 in Melbourne, and Warwick Allison with slightly newer/different cards.

There are also notes for DViCO FusionHDTV DVB-T Dual Tuner cards.

These notes do *not* apply to the DVICO "Lite" cards (Warwick never got those to actually work, but Dane Allison did).

The latest versions (as at 30 March 2007) of V4L now support the Ultraview Lite cards.

Hardware

When installing your card, ensure that you plug the ultraview/dvico audio-out port into the CD-in port (or AUX, if you have one), on your sound card. This is an on-card port in both cases - not one of the ones at the rear that you can access from outside your computer. A suitable cable is supplied with the Ultraview.

The "DViCO FusionHDTV DVB-T Dual Tuner" card has two tuners. One is PCI, the other is USB. You will either need to connect an external USB cable to your card, or use the supplied internal USB cable which connects to your motherboard.

Kernel / Packages

For the Ultraview card on FC3 with 2.6.12, Kudzu will automatically add an entry into /etc/modprobe.conf for you for the card, which should look like this:

   alias char-major-81 cx8800

On the Ultraview card on FC3 with 2.6.12 you will need to force the cx88xx module into DVICO mode by adding the following like

   options cx88xx card=21

On FC4, kernel 2.6.15 and the DViCO FusionHDTV cards I didn't need to make any changes to modprobe.conf but did need to add the following lines to the start function of /etc/rc.d/init.d/mythbackend

/sbin/modprobe video-buf-dvb
/sbin/modprobe cx88-dvb

For Ubuntu Breezy, modify the file /etc/modprobe.d/aliases, and change the line:

 alias char-major-81 videodev

to:

 alias char-major-81 cx8800

Also, create a file /etc/modprobe.d/dvico with the following contents:

 options cx88xx card=21

DViCO Dual Digital 2

Note: Much of this information below is historical. Ubuntu 10.4 (and possibly others) have the DViCO Dual Digital 2 working out-of-the-box, except for enabling propriety firmware for DVB cards via "enable hardware drivers".

For those with a revision 1.4 or later board, Chris Pascoe has just released (August 2006) an update to make it work.

I have confirmed it working on FC5 with a 2.6.17.8 vanilla kernel, and others have tested it to be working on other combinations.

It's part of the v4l-dvb sources. You will need to get the latest mercurial sources, and compile them. Most distros have mecurial available as extras (e.g. yum install mercurial). They recommend you use a vanilla kernel (i.e. one from www.kernel.org) and compile it yourself. In either cace, you'll need the kernel source. FC5 kernel soruce may be downloaded using yum install kernel-devel.

The instructions are quite easy to follow. Find them at http://www.linuxtv.org and look for the "DVB CVS/Mercurial" on the sidebar.

Getting the Firmware manually

In addition to the v4l-dvb drivers, the USB tuner (it has both PCI and USB tuners) needs the correct firmare to operate.

If you do not have the firmware (FC5 does not ship with it, not sure if any others do), there is a script in the kernel documentation to get it:

 cd /usr/src/linux-2.6.17.8/Documentation/dvb/   # Modify for source directory, if necessary
 chmod 777 get_dvb_firmware
 ./get_dvb_firmware bluebird

And you'll need to copy it to one of the following two places, depending on your distro:

 cp dvb-usb-bluebird-01.fw /usr/lib/hotplug/firmware/dvb-usb-bluebird-01.fw   # OR
 cp dvb-usb-bluebird-01.fw /lib/firmware/dvb-usb-bluebird-01.fw   # This one for FC5

Alsa

Ensure that your 'CD' device on your sound card is enabled as a 'capture' device. Run: alsamixer, press F4 to switch to the 'Capture' options. Move to 'CD' and press 'space' to set CD as a capture device. Press F3 to jump back to 'Playback' and set the CD volume to 100%.

Difference between revisions of "DVICO-Ultraview Install in Australia"

Latest revision as of 19:39, 26 September 2021

Contents

Background

Hardware

Kernel / Packages

DViCO Dual Digital 2

Getting the Firmware manually

Alsa

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Wiki Navigation

Official Resources

Tools

Print/export

@@ Line 1: / Line 1: @@
+{{Cleanup|msg=This page should be cleared off in preparation for deletion.  Tuner specific information should be migrated to the [http://linuxtv.org/wiki/index.php/Main_Page LinuxTV Wiki], and any additional information moved to more generic pages. Discuss the issue on the [[Talk:{{PAGENAME}}|talk page]]}}
 == Background ==
@@ Line 10: / Line 12: @@
-The latest versions (as at 30 March 2007) of V4L now support the Ultraview Lite cards. If not recognised automatically, go to http://linuxtv.org/repo/#mercurial to update. Using mercurial is the easiest way of updating the files. You may need to update/install python to 2.3 to run mercurial and may need to install mercurial manually. I carried out the steps set out, including the optional steps, rebooted and the card was recognised.
+The latest versions (as at 30 March 2007) of V4L now support the Ultraview Lite cards.
-== Before you Start ==
-This assumes that you've followed the [http://wilsonet.com/mythtv/ Fedora Myth(TV)ology HOWTO] guide on Fedora Core 3 or Fedora Core 4.
-For other distributions, YMMV, but things should be reasonably close.
-I have also included some notes for Ubuntu Breezy that should help.
-== Card Source ==
-I picked up my Ultraview card from AB&T in Philip, Canberra (Australia) - just under 200ish. Belconnen should have some also - apparently they're fairly easy to find around Canberra as of Nov 2005.
 == Hardware ==
@@ Line 32: / Line 21: @@
 == Kernel / Packages ==
-Older kernels may not have the drivers required, so update to the most recent kernel available using:
- yum update
 For the Ultraview card on FC3 with 2.6.12, Kudzu will automatically add an entry into /etc/modprobe.conf for you for the card, which should look like this:
@@ Line 54: / Line 40: @@
    options cx88xx card=21
-Breezy users will also want to use 'EasyUbuntu' to pull back the appropriate multimedia packages (win32codecs, etc). Once done, add the following to your /etc/apt/sources.list:
+=== DViCO Dual Digital 2 ===
-deb http://deb.thehunter.ws/ breezy mythtv-stable
-#deb-src http://deb.thehunter.ws/ breezy mythtv-stable
-.. and install the appropriate mythtv packages.
-[[Image:Important.png|left]] '''Note:''' If you manually compile your kernel, 2.6.12 has a known bug related to tuning: http://www.linuxtv.org/pipermail/linux-dvb/2005-July/003197.html <br style="clear:left;"/>
-=== DViCO Dual Tuner ===
+Note: Much of this information below is historical. Ubuntu 10.4 (and possibly others) have the DViCO Dual Digital 2 working out-of-the-box, except for enabling propriety firmware for DVB cards via "enable hardware drivers".
 For those with a revision 1.4 or later board, Chris Pascoe has just released (August 2006) an update to make it work.
@@ Line 72: / Line 51: @@
 The instructions are quite easy to follow.  Find them at http://www.linuxtv.org and look for the "DVB CVS/Mercurial" on the sidebar.
+==== Getting the Firmware manually ====
 In addition to the v4l-dvb drivers, the USB tuner (it has both PCI and USB tuners) needs the correct firmare to operate.
 If you do not have the firmware (FC5 does not ship with it, not sure if any others do), there is a script in the kernel documentation to get it:
-   cd /usr/src/linux-2.6.17.8/Documentation/dvb/   # Modify for soruce directory, if nessessary
+   cd /usr/src/linux-2.6.17.8/Documentation/dvb/   # Modify for source directory, if necessary
    chmod 777 get_dvb_firmware
    ./get_dvb_firmware bluebird
@@ Line 87: / Line 68: @@
 Ensure that your 'CD' device on your sound card is enabled as a 'capture' device. Run: alsamixer, press F4 to switch to the 'Capture' options. Move to 'CD' and press 'space' to set CD as a capture device. Press F3 to jump back to 'Playback' and set the CD volume to 100%.
-== Permissions ==
-For Fedora, add to /etc/security/console.perms:
-    # Mythtv permissions
-    <dvb>=/dev/dvb/adapter?/*
-    <console> 0660 /dev/lirc0 0660 root.uucp
-    <console> 0660 <dvb> 0660 root.root
-Reboot. This will allow the mythtv user (or whoever logs into the console)
-to access the card, rather than restricting it to root only.
-For Ubuntu Breezy, add the 'mythtv' user to the following groups in /etc/group:
-  cdrom, audio, video, plugdev
-== Tuner ==
-Go to http://www.dba.org.au/index.asp?sectionID=22, put in your post-code (eg: 2902)
-Select the region that is closest to you (eg: Tuggeranong Hill)
-Note down the "middle frequency" for each channel. Convert it to HZ by multiplying by 1000000 (788.5 becomes 788500000).
-== tv_grab_au_reg ==
-Option 1
-Download tv_grab_au_reg, and follow the instructions from http://www.cse.unsw.edu.au/~willu/xmltv/tv_grab_au_reg.html
-Note the new grabber can obtain data from both Oztivo and ICE
-[[Image:Important.png|left]] '''Note:''' I fired up phpmyadmin at this point, and threw the xmlid into the channels table (I didn't follow the above instructions exactly) - I suspect you won't need to do this, so I won't go into significant detail.<br style="clear:left;"/>
-[[Image:Important.png|left]] '''Note:''' once you create the "video source".xml file you will need to update the registration/password details as per your [http://minnie.tuhs.org/twiki/bin/view/TVGuide/ oztivo] userid/passwd and configure your channels in the file as well. <br style="clear:left;"/>
-Option 2
-Alternatively, you can use the tv_grab_au script from imir which downloads the channel guide from NineMSN, which is surprisingly accurate.  http://www.immir.com/tv_grab_au
-== MythTV Setup ==
-Run mythtvsetup
-Set up the 'General' options as appropriate
-Define a new Capture card, and configure it as a "Digital Video Broadcast Card (DVB)"
-The DVB Card Number, is generally '0', but may be different on your system.
-If you have the Dual Tuner card you will have a DVB Card Number '1' as well as '0'.  Add this as a second card.
-Once you have the correct Card type, and card number, the 'Card Name' and 'Type' should show appropriate values.
-Under Advanced -> Recording Options: Check 'Use Hardware MPEG Encoder'
-Finish
-Video Sources -> New Video Source
-Video Source Name: HDTV Tuner (this name can be pretty-much arbitrary)
-XMLTV Listings Grabber: Australia
-Channel frequency table: default
-Input Connections: Set DVB0 to a video source of 'HDTV Tuner'.
-If you have the Dual Tuner card set DVB1 to a video source of 'HDTV Tuner' as well.
-== Channel Editor ==
-Go to 'Advanced' (Note: the 'm' key will allow you to edit/delete stuff in this submenu)
-Select 'New Transport'
-Enter each frequency you found above (in Hz). Select a Bandwidth of 7Hz
-Select 'scan for channels'
-Change 'scan type' to 'Existing transport scan'
-Select each transport in turn, and Scan. Channels should be added to the main listing once they're found.
-[[Image:Important.png|left]] '''Note:''' This process didn't want to work for me under 0.19. I later worked out though, that I didn't have the 'timeout' settings set to an acceptable value. Try at least doubling the default values, and you should be fine. However, channel frequencies for Kambah/Tuggeranong are provided here if you need them:<br style="clear:left;"/>
-    INSERT INTO `channel` VALUES (1002, '2', '31', 1, 'ABC TV Canberra', 'ABC TV Canberra', '/home/mythtv/.mythtv/channels/abc.png', NULL, '', 'ABC-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 1, 529, 0);
-    INSERT INTO `channel` VALUES (1021, '21', '31', 1, 'ABC2', 'ABC2', '/home/mythtv/.mythtv/channels/abc.png', NULL, '', 'ABC2', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 1, 530, 0);
-    INSERT INTO `channel` VALUES (1022, '22', '31', 1, 'ABC TV', 'ABC TV', '/home/mythtv/.mythtv/channels/abc.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 1, 531, 0);
-    INSERT INTO `channel` VALUES (1020, '20', '31', 1, 'ABC HDTV', 'ABC HDTV', '/home/mythtv/.mythtv/channels/abc.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 1, 848, 0);
-    INSERT INTO `channel` VALUES (3374, '2374', NULL, 1, 'PRIME Canberra', 'PRIME Canberra', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', 'Prime-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 6, 2374, 0);
-    INSERT INTO `channel` VALUES (3400, '2400', NULL, 1, 'PRIME HD', 'PRIME HD', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 6, 2400, 0);
-    INSERT INTO `channel` VALUES (3401, '2401', NULL, 1, 'PRIME View 1', 'PRIME View 1', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 6, 2401, 0);
-    INSERT INTO `channel` VALUES (3402, '2402', NULL, 1, 'PRIME View 2', 'PRIME View 2', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 6, 2402, 0);
-    INSERT INTO `channel` VALUES (3403, '2403', NULL, 1, 'PRIME View 3', 'PRIME View 3', '/home/mythtv/.mythtv/channels/prime.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 6, 2403, 0);
-    INSERT INTO `channel` VALUES (1030, '30', NULL, 1, 'SBS HD', 'SBS HD', '/home/mythtv/.mythtv/channels/sbs.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 3, 848, 0);
-    INSERT INTO `channel` VALUES (1003, '3', NULL, 1, 'SBS DIGITAL 1', 'SBS DIGITAL 1', '/home/mythtv/.mythtv/channels/sbs.png', NULL, '', 'SBS-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 3, 849, 0);
-    INSERT INTO `channel` VALUES (1033, '33', NULL, 1, 'SBS DIGITAL 2', 'SBS DIGITAL 2', '/home/mythtv/.mythtv/channels/sbs.png', NULL, '', 'SBS-NEWS', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 3, 850, 0);
-    INSERT INTO `channel` VALUES (1031, '31', NULL, 1, 'SBS EPG', 'SBS EPG', '/home/mythtv/.mythtv/channels/sbs.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 3, 851, 0);
-    INSERT INTO `channel` VALUES (1001, '1', NULL, 1, 'WIN TV Canberra', 'WIN TV Canberra', '/home/mythtv/.mythtv/channels/win.png', NULL, '', 'WIN-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 5, 1, 0);
-    INSERT INTO `channel` VALUES (1010, '10', NULL, 1, 'WIN TV HD', 'WIN TV HD', '/home/mythtv/.mythtv/channels/win.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 5, 10, 0);
-    INSERT INTO `channel` VALUES (3055, '2055', NULL, 1, 'SC10 Canberra', 'SC10 Canberra', '/home/mythtv/.mythtv/channels/10.png', NULL, '', 'Ten-Can', 0, 32768, 32768, 32768, 32768, 'Default', 0, 1, '', 0, 4, 2055, 0);
-    INSERT INTO `channel` VALUES (3087, '2087', NULL, 1, 'SC10 HD', 'SC10 HD', '/home/mythtv/.mythtv/channels/10.png', NULL, '', '', 0, 32768, 32768, 32768, 32768, 'Default', 0, 0, '', 0, 4, 2087, 0);
-    INSERT INTO `dtv_multiplex` VALUES (1, 1, 529, 4112, 746500000, '1', NULL, NULL, NULL, 'qam_16', '7', '1/2', '8', '1/16', 0, 'qam_64', 'n', '3/4', 'dvb', 16, '20060218194836');
-    INSERT INTO `dtv_multiplex` VALUES (2, 1, NULL, NULL, 774500000, '0', NULL, NULL, NULL, 'qam_16', '7', 'Auto', '8', 'auto', 0, 'qam_64', 'n', 'Auto', 'dvb', 33, '20060218195323');
-    INSERT INTO `dtv_multiplex` VALUES (3, 1, NULL, NULL, 732500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 33, '20060218201128');
-    INSERT INTO `dtv_multiplex` VALUES (4, 1, NULL, NULL, 767500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 33, '20060218201158');
-    INSERT INTO `dtv_multiplex` VALUES (5, 1, 12922, 12915, 788500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 7, '20060220232313');
-    INSERT INTO `dtv_multiplex` VALUES (6, 1, 2462, 12929, 809500000, 'a', NULL, 'auto', NULL, 'auto', '7', 'auto', 'a', 'auto', 0, 'auto', 'a', 'auto', 'dvb', 17, '20060218202301');
-== LIRC ==
-Grab lircd patch from http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/.
-download lircd 07, patch, make as per instructions on the site. Copy the resulting lircd binary over /usr/sbin/lircd (beware: apt-get upgrades that include lircd may break your remote config. Might be worth saving off a copy of the binary somewhere else).
-The latest FC4 kernel contains updated drivers to make these cards work (2.16.1+).  You will not need to download any patches, you may need to compile lirc 0.8.0 or later though.
-Fedora users: modify /etc/sysconfig/lircd to:
-    LIRCD_OPTIONS="--driver=dvico --device=/dev/hiddev0"
-Ubuntu users: modify /etc/lirc/hardware.conf to include:
-    DEVICE="/dev/usb/hiddev0"
-    DRIVER="dvico"
-[[Image:Important.png|left]] '''Note:''' There could potentially be other hiddev devices on your system.. in this case, your tuner may be hiddev1 or 2 - not sure how to best determine this.<br style="clear:left;"/>
-Beware if you have the Dual Tuner card.  You will probably need to use the "dev/input" drivers.  The "dvico" driver is for "hiddev" support, not for "dev/input" input support.
-Fedora users: modify /etc/sysconfig/lircd to:
-    LIRCD_OPTIONS="--driver=dev/input --device=/dev/input/event2 -p 666 /etc/lircd.conf"
-[[Image:Important.png|left]] '''Note:''' You could need event3 or higher.  Look for event entries in output of "dmesg" after you first boot.<br style="clear:left;"/>
-  DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
-  dvb-usb: recv bulk message failed: -110
-  DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
-  input: IR-receiver inside an USB DVB receiver as /class/input/input2
-  dvb-usb: schedule remote query interval to 150 msecs.
-  dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.
-~mythtv/.mythtv/lirc: Set as follows:
-[[Image:Important.png|left]] '''Note:''' DVICO cards that ship with a "Windows Media Center" orient controller, have slightly different bindings - the set-up below appears to accomodate both, to a degree. Feel free to tweak to your own personal habits.<br style="clear:left;"/>
-[[Image:Important.png|left]] '''Note:''' This config roughly mirrors the Hauppauge grey remote configuration, with a few extras added to cope with the specific buttons on the DVICO
-remote.<br style="clear:left;"/>
-{{Code box|~mythtv/.mythtv/lirc|
-<pre>
-    # Ultraview / dvico DVB-T Black remote
-    # Channel Up
-    begin
-    prog = mythtv
-    button = ch_up
-    repeat = 3
-    config = Up
-    end
-    # Channel Down
-    begin
-    prog = mythtv
-    button = ch_down
-    repeat = 3
-    config = Down
-    end
-    # OK/Select
-    begin
-    prog = mythtv
-    button = ok
-    config = Space
-    end
-    # Play/Pause
-    begin
-    prog = mythtv
-    button = playpause
-    config = P
-    end
-    begin
-    prog = mythtv
-    button = stop
-    config = Esc
-    end
-    # Escape/Exit/Back
-    begin
-    prog = mythtv
-    button = back
-    config = Esc
-    end
-    # Escape/Exit/Back
-    begin
-    prog = mythtv
-    button = tv_onoff
-    config = Esc
-    end
-    # big green start button
-    begin
-    prog = mythtv
-    button = start
-    repeat = 3
-    config = Esc
-    end
-    # Mute
-    begin
-    prog = mythtv
-    button = mute
-    repeat = 3
-    config = F9
-    end
-    # Fast forward (30 sec default)
-    begin
-    prog = mythtv
-    button = fastforward
-    repeat = 24
-    config = Right
-    end
-    # Back (10 sec default)
-    begin
-    prog = mythtv
-    button = rewind
-    repeat = 24
-    config = Left
-    end
-    # Skip forward (10 min default)
-    begin
-    prog = mythtv
-    button = skip
-    repeat = 3
-    config = PgDown
-    end
-    # Skip backward (10 min default)
-    begin
-    prog = mythtv
-    button = replay
-    repeat = 3
-    config = PgUp
-    end
-    # Record
-    begin
-    prog = mythtv
-    button = record
-    repeat = 3
-    config = R
-    end
-    # OSD browse
-    begin
-    prog = mythtv
-    button = guide
-    repeat = 3
-    config = O
-    end
-    # Display EPG while in live TV,
-    # View selected show while in EPG
-    begin
-    prog = mythtv
-    button = setup
-    repeat = 3
-    config = M
-    end
-    # Scroll up
-    begin
-    prog = mythtv
-    button = up
-    repeat = 3
-    config = Up
-    end
-    # Scroll down
-    begin
-    prog = mythtv
-    button = down
-    repeat = 3
-    config = Down
-    end
-    # Scroll Left
-    begin
-    prog = mythtv
-    button = left
-    repeat = 3
-    config = Left
-    end
-    # Scroll Right
-    begin
-    prog = mythtv
-    button = right
-    repeat = 3
-    config = Right
-    end
-    # Bring up OSD info
-    begin
-    prog = mythtv
-    button = more
-    repeat = 3
-    config = I
-    end
-    # Change display aspect ratio
-    begin
-    prog = mythtv
-    button = aspect
-    repeat = 3
-    config = W
-    end
-    # Seek to previous commercial cut point
-    begin
-    prog = mythtv
-    button = snapshot
-    repeat = 3
-    config = Q
-    end
-    # Seek to next commercial cut point
-    begin
-    prog = mythtv
-    button = folder_open
-    repeat = 3
-    config = Z
-    end
-    # Numbers 0-9
-    begin
-    prog = mythtv
-    button = 0
-    repeat = 3
-    config = 0
-    end
-    begin
-    prog = mythtv
-    button = 1
-    repeat = 3
-    config = 1
-    end
-    begin
-    prog = mythtv
-    button = 2
-    repeat = 3
-    config = 2
-    end
-    begin
-    prog = mythtv
-    button = 3
-    repeat = 3
-    config = 3
-    end
-    begin
-    prog = mythtv
-    button = 4
-    repeat = 3
-    config = 4
-    end
-    begin
-    prog = mythtv
-    button = 5
-    repeat = 3
-    config = 5
-    end
-    begin
-    prog = mythtv
-    button = 6
-    repeat = 3
-    config = 6
-    end
-    begin
-    prog = mythtv
-    button = 7
-    repeat = 3
-    config = 7
-    end
-    begin
-    prog = mythtv
-    button = 8
-    repeat = 3
-    config = 8
-    end
-    begin
-    prog = mythtv
-    button = 9
-    repeat = 3
-    config = 9
-    end
-    begin
-    prog = mythtv
-    button = dvd_menu
-    config = M
-    end
-    begin
-    prog = mythtv
-    button = vol_down
-    repeat = 3
-    config = [
-    end
-    begin
-    prog = mythtv
-    button = vol_up
-    repeat = 3
-    config = ]
-    end
-    begin
-    prog = mythtv
-    button = dtv
-    config = C
-    end
-</pre>
-}}
-~mythtv/lirc: Set as follows:
-{{Code box|~mythtv/lirc|
-<pre>
-    ### MPlayer/Xine lirc setup
-    # Show OSD
-    begin
-    prog = mplayer
-    button = guide
-    repeat = 3
-    config = osd
-    end
-    # Pause playback
-    begin
-    prog = mplayer
-    button = stop
-    repeat = 3
-    config = pause
-    end
-    # Skip ahead a minute if playing
-    # If paused, resume playing
-    begin
-    prog = mplayer
-    button = playpause
-    repeat = 3
-    config = seek +1
-    end
-    # Stop playback and exit
-    begin
-    prog = mplayer
-    button = tv_onoff
-    repeat = 3
-    config = quit
-    end
-    begin
-    prog = mplayer
-    button = back
-    repeat = 3
-    config = quit
-    end
-    # big green start button
-    begin
-    prog = mplayer
-    button = start
-    repeat = 3
-    config = quit
-    end
-    # Mute
-    begin
-    prog = mplayer
-    button = mute
-    repeat = 3
-    config = mute
-    end
-    # Seek back 10 seconds
-    begin
-    prog = mplayer
-    button = left
-    repeat = 3
-    config = seek -10
-    end
-    # Seek forward 30 seconds
-    begin
-    prog = mplayer
-    button = right
-    repeat = 3
-    config = seek +30
-    end
-    # Seek forward 3 minutes
-    begin
-    prog = mplayer
-    button = fastforward
-    repeat = 3
-    config = seek +180
-    end
-    # Seek backward 3 minutes
-    begin
-    prog = mplayer
-    button = rewind
-    repeat = 3
-    config = seek -180
-    end
-    # Seek forward 10 minutes
-    begin
-    prog = mplayer
-    button = skip
-    repeat = 3
-    config = seek +600
-    end
-    # Seek backward 10 minutes
-    begin
-    prog = mplayer
-    button = replay
-    repeat = 3
-    config = seek -600
-    end
-    # Toggle full-screen
-    begin
-    prog = mplayer
-    button = fullscreen
-    repeat = 3
-    config = vo_fullscreen
-    end
-    # Xine
-    begin
-    prog = xine
-    button = playpause
-    repeat = 3
-    config = Play
-    end
-    begin
-    prog = xine
-    button = stop
-    repeat = 3
-    config = Pause
-    end
-    begin
-    prog = xine
-    button = back
-    config = Quit
-    end
-    begin
-    prog = xine
-    button = tv_onoff
-    config = Quit
-    end
-    begin
-    prog = xine
-    button = right
-    repeat = 3
-    config = SeekRelative+10
-    end
-    begin
-    prog = xine
-    button = left
-    repeat = 3
-    config = SeekRelative-10
-    end
-    begin
-    prog = xine
-    button = fastforward
-    repeat = 3
-    config = SeekRelative+30
-    end
-    begin
-    prog = xine
-    button = rewind
-    repeat = 3
-    config = SeekRelative-30
-    end
-    begin
-    prog = xine
-    button = skip
-    repeat = 3
-    config = SeekRelative+300
-    end
-    begin
-    prog = xine
-    button = replay
-    repeat = 3
-    config = SeekRelative-300
-    end
-    begin
-    prog = xine
-    button = up
-    repeat = 1
-    config = EventUp
-    end
-    begin
-    prog = xine
-    button = down
-    repeat = 1
-    config = EventDown
-    end
-    begin
-    prog = xine
-    button = ok
-    repeat = 0
-    config = EventSelect
-    end
-    begin
-    prog = xine
-    button = guide
-    repeat = 0
-    config = Menu
-    end
-    begin
-    prog = xine
-    button = setup
-    repeat = 0
-    config = Menu
-    end
-    begin
-    prog = xine
-    button = vol_up
-    repeat = 1
-    config = Volume+
-    end
-    begin
-    prog = xine
-    button = vol_down
-    repeat = 1
-    config = Volume-
-    end
-</pre>
-}}
-/etc/lircd.conf: Set as follows:
-{{Code box|/etc/lircd.conf|
-<pre>
-    # Please make this file available to others
-    # by sending it to <lirc@bartelmus.de>
-    #
-    # this config file was automatically generated
-    # using lirc-0.8.1pre1(dev/input) on Tue Jun 20 19:52:04 2006
-    #
-    # contributed by  Craig Cook
-    #
-    # brand:                      DViCO FusionHDTV DVB-T Dual Digital
-    # model no. of remote control: MCE
-    # devices being controlled by this remote:
-    #
-    begin remote
-      name  DViCO_Dual_Digital
-      bits           16
-      eps            30
-      aeps          100
-      one             0     0
-      zero            0     0
-      pre_data_bits   16
-      pre_data       0x1
-      gap            251756
-      toggle_bit      0
-          begin codes
-                        0x0002
-                        0x0003
-                        0x0004
-                        0x0005
-                        0x0006
-                        0x0007
-                        0x0008
-                        0x0009
-                        0x000A
-                        0x000B
-              rew                      0x00A8
-              playpause                0x00A4
-              ff                       0x00D0
-              mute                     0x0071
-              stop                     0x0080
-              rec                      0x00A7
-              power                    0x0074
-              camera                   0x00D4
-              live                     0x0182
-              folder                   0x0086
-              voldown                  0x0072
-              volup                    0x0073
-              chup                     0x0192
-              chdn                     0x0193
-              start                    0x001C
-              replay                   0x00A5
-              skip                     0x00A3
-              down                     0x006C
-              right                    0x006A
-              left                     0x0069
-              up                       0x0067
-              ok                       0x0160
-              dvdmenu                  0x008B
-              back                     0x009E
-              setup                    0x008D
-              tvpower                  0x0164
-              guide                    0x016D
-              info                     0x0166
-              alttab                   0x000F
-              dtv                      0x0179
-              mp3                      0x0187
-              dvd                      0x0185
-              cpf                      0x016C
-              aspect                   0x0173
-              zoom                     0x0174
-          end codes
-    end remote
-</pre>
-}}
-~mythtv/.lircrc: Set as follows (for the Dvico Dual Tuner):
-{{Code box|~mythtv/.lircrc|
-<pre>
-    # lircrc.example.DVICO-nativelirc
-    # 2004-07-04, Chris Pascoe
-    # mailto:linuxdvb@itee.uq.edu.au
-    # Save this file in ~/.mythtv/lircrc
-    begin
-        prog = mythtv
-        button = power
-        config = Esc
-    end
-    begin
-        prog = mythtv
-        button = Go
-    # Swap the PiP windows
-        config = N
-    end
-    begin
-        prog = mythtv
-        button = 1
-        config = 1
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = 2
-        config = 2
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = 3
-        config = 3
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = 4
-        config = 4
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = 5
-        config = 5
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = 6
-        config = 6
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = 7
-        config = 7
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = 8
-        config = 8
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = 9
-        config = 9
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = back
-        config = Esc
-    end
-    begin
-        prog = mythtv
-        button = 0
-        config = 0
-        config = return
-    end
-    begin
-        prog = mythtv
-        button = info
-        config = I
-    end
-    begin
-        prog = mythtv
-        button = guide
-        config = S
-    end
-    begin
-       prog = mythtv
-    # This is the Red key
-    # We'll use it for "Delete"
-       button = red
-       config = D
-    end
-    # Note the "repeat =" strings in the volume and channel.
-    # This means that if you hold down the key, every nth instance will be
-    # passed.  This depends on your system, so you may want to increase or
-    # decrease this and see what happens.  repeat = 1 is probably too
-    # fast.
-    begin
-      prog = mythtv
-      button = voldown
-      repeat = 2
-      config = F10
-    end
-    begin
-      prog = mythtv
-      button = volup
-      repeat = 2
-      config = F11
-    end
-    begin
-        prog = mythtv
-        button = chup
-        config = Up
-    end
-    begin
-        prog = mythtv
-        button = chdown
-        config = Down
-    end
-    begin
-        prog = mythtv
-        button = up
-    # This is the "up" on the central diamond
-        config = Up
-    end
-    begin
-        prog = mythtv
-        button = down
-    # This is the "down" on the central diamond
-        config = Down
-    end
-    begin
-        prog = mythtv
-        button = left
-    # This is the "left" on the central diamond
-        config = Left
-    end
-    begin
-        prog = mythtv
-        button = right
-    # This is the "right" on the central diamond
-        config = Right
-    end
-    begin
-        prog = mythtv
-    # Middle button on the diamond
-        button = ok
-        config = Return
-    end
-    begin
-        prog = mythtv
-        button = start
-        config = Return
-    end
-    begin
-        prog = mythtv
-        button = mute
-        config = |
-    end
-    begin
-        prog = mythtv
-        button = playpause
-        config = ctrl+p
-    end
-    begin
-       prog = mythtv
-    # Change focus for PiP (to change channel in the other window)
-       button = atvdtv
-       config = B
-    end
-    begin
-       prog = mythtv
-    # Toggle PiP on/off
-       button = zoom
-       config = V
-    end
-    begin
-        prog = mythtv
-        button = rew
-        config = Left
-    #    config = seek -180
-    end
-    begin
-        prog = mythtv
-        button = stop
-        config = P
-    end
-    begin
-        prog = mythtv
-        button = ff
-        config = Right
-    #    config = seek +180
-    end
-    begin
-        prog = mythtv
-        button = record
-        config = R
-    end
-    #begin
-    #   prog = mythtv
-    ## Teletext
-    #   button = stop
-    #   config = T
-    #end
-    begin
-        prog = mythtv
-        button = camera
-        config = P
-    end
-    begin
-       prog = mythtv
-       button = replay
-    # Use for backwards commercial skip
-       config = Q
-    end
-    begin
-       prog = mythtv
-       button = skip
-    # Use for forward commercial skip
-       config = Z
-    end
-    begin
-       prog = mythtv
-       button = dvd
-       config = Ctrl+D
-    end
-    begin
-       prog = mythtv
-       button = mp3
-       config = Ctrl+M
-    end
-    begin
-       prog = mythtv
-       button = aspect
-       config = W
-    end
-    begin
-       prog = mythtv
-       button = dvhs
-       config = c
-    end
-    # Xine
-    begin
-       prog = xine
-       button = playpause
-       repeat = 3
-       config = Play
-    end
-    begin
-       prog = xine
-       button = stop
-       repeat = 3
-       config = Pause
-    end
-    begin
-       prog = xine
-       button = back
-       config = Quit
-    end
-    begin
-       prog = xine
-       button = tv_onoff
-       config = Quit
-    end
-    begin
-       prog = xine
-       button = right
-       repeat = 3
-       config = SeekRelative+10
-    end
-    begin
-       prog = xine
-       button = left
-       repeat = 3
-       config = SeekRelative-10
-    end
-    begin
-       prog = xine
-       button = ff
-       repeat = 3
-       config = SeekRelative+30
-    end
-    begin
-       prog = xine
-       button = rew
-       repeat = 3
-       config = SeekRelative-30
-    end
-    begin
-       prog = xine
-       button = skip
-       repeat = 3
-       config = SeekRelative+300
-    end
-    begin
-       prog = xine
-       button = replay
-       repeat = 3
-       config = SeekRelative-300
-    end
-    begin
-       prog = xine
-       button = up
-       repeat = 1
-       config = EventUp
-    end
-    begin
-       prog = xine
-       button = down
-       repeat = 1
-       config = EventDown
-    end
-    begin
-       prog = xine
-       button = ok
-       repeat = 0
-       config = EventSelect
-    end
-    begin
-       prog = xine
-       button = guide
-       repeat = 0
-       config = Menu
-    end
-    begin
-       prog = xine
-       button = setup
-       repeat = 0
-       config = Menu
-    end
-    begin
-       prog = xine
-       button = volup
-       repeat = 1
-       config = Volume+
-    end
-    begin
-       prog = xine
-       button = voldown
-       repeat = 1
-       config = Volume-
-    end
-</pre>
-}}
-reboot.
-[[Category:HOWTO]]